CLASS X MG-25 SERIES PIN GAGE SETS
Used as masters to calibrate measuring equipment and
check linearity of comparators, micrometers, and calipers.
These “Tenth Step” gage sets have unlimited applications,
such as quality control inspection, prototype work and
production layout. Inspectors select from the range of pins
to find the size of a hole or slot. These round masters
simulate a cylindrical part which, unlike flat blocks, can
detect uneven wear on the tips of micrometers and calipers.
The thin “line” of contact detects uneven face wear better
than flat gage blocks with large contact area.
 |
FEATURES:
£ Each set contains
25 pieces of Class X tolerance (.00004”) gage pins.
Traceable to NIST.
£ Choice of two
tolerances: Plus (+.00004”) or Minus (-.00004”)
£ Sets consist of a
center nominal size, and 12 gages larger in .0001”
steps and 12 gages smaller in .0001”
steps.
£ Each gage is
inspected and has a 2 microfinish or better.
£ Heat treated and
through hardened to 60-62 Rockwell C
£ All pin gages over
.060” or 1. 51mm are laser marked with size
direction of tolerance and serial number for
traceability. |
|
